fault UHV

fault UHV

فروشگاه دانشجو

بررسي حالت گذراي الكترومغناطيسي و وفق­ پذيري حفاظت ديفرانسيل ترانسفورماتور قدرتUHVبراساس محدوديت هارمونيك دوم

۱۵ بازديد
دسته بندي مقالات ترجمه شده isi
فرمت فايل doc
حجم فايل 897 كيلو بايت

پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود

پرداخت و دانلود

Analysis of Electromagnetic Transient and Adaptability of Second-Harmonic Restraint Based Differential Protection of UHV Power Transformer

 

Abstract—An autotransformer is used as the main type of UHV
transformer, but the internal fault model of autotransformer provided
by most simulation software is not available. To find out the
existing problems of the application of the differential protection of
UHVtransformer, a three winding autotransformer model is firstly
built according to the existing Unified Magnetic Equivalent Circuit
transformer model provided by EMTDC software. Furthermore,
the internal fault model of UHV transformer is set up. By virtue of
above models, the energization and internal faults are simulated to
validate the well-applied differential protection using second-harmonic
blocking. It can be proven that the second-harmonic ratios
of three phase inrushes of the UHV power transformer are
all below 10% in some energization scenarios. In this case, the
maloperation of the differential protection by means of 15%
20% second-harmonic restraint ratio cannot be avoided. On the
other hand, the second-harmonic ratio of the fault current is relatively
high in the beginning of fault inception for some light faults,
leading to the short time delay of operation of protection. This discovery
will encourage the research and development of the novel
scheme of the main protection of UHV transformer.

بررسي حالت گذراي الكترومغناطيسي و وفق­ پذيري حفاظت ديفرانسيل ترانسفورماتور قدرتUHVبراساس محدوديت هارمونيك دوم 

 

چكيده

اتوترانسفورماتور به صورت نوع اصلي ترانسفورماتور UHV استفاده مي­شود، با اين حال، مدل خطاي داخلياتوترانسفورماتور كه در اكثر نرم­افزارهاي شبيه­سازي ارائه شده است وجود ندارد. براي حل مسائل موجود در زمينهكاربردحفاظت ديفرانسيل ترانسفورماتور UHV، ابتدا يك اتوترانسفورماتور با سه سيم­پيچ و با استفاده ازمدل ترانسفورماتورِمدار معادل مغناطيسي يكپارچه موجود در محيط نرم افزار EMTDCساخته مي­شود. علاوه بر اين،مدل خطاي داخلي ترانسفورماتور UHV ايجاد مي­شود. با توجه به مدل­هاي فوق، برق­دار كردن و خطاهاي داخلي براي اعتباربخشي حفاظت ديفرانسيلكه بخوبي اعمال شده است با از بين بردنهارمونيك دوم شبيه­سازي مي­شود. مي­توان اثبات كرد كه نسبت­هاي هارمونيك دوم [جريان­هاي] هجومي[1]ترانسفورماتور قدرتUHVهمگي در برخي از حالاتبرق­دار كردن زير 10% هستند. در اين حالت، نمي­توان از عملكرد نادرست حفاظت ديفرانسيلي با استفاده از 15% الي 20% نسبت هارمونيك دوم اجتناب كرد. به بيان ديگر، نسبت هارمونيك دوم جريان خطا در ابتداي وقوع خطا براي برخي از خطاهاي ضعيف بسيار بزرگ است،كه منجر به تاخير زماني كوتاه مدتِ عمليات حفاظتي مي­شود. اين يافته (كشف) انگيزه تحقيق و توسعه طرح جديدحفاظت اصلي ترانسفورماتورUHVرا ايجاد كرده است.

 

 

پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود

پرداخت و دانلود