| دسته بندي | پاورپوينت |
| بازديد ها | 0 |
| فرمت فايل | ppt |
| حجم فايل | 363 كيلو بايت |
| تعداد صفحات فايل | 44 |


Microcontroller
8051
| دسته بندي | پاورپوينت |
| بازديد ها | 0 |
| فرمت فايل | ppt |
| حجم فايل | 363 كيلو بايت |
| تعداد صفحات فايل | 44 |


Microcontroller
8051
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 1.674 مگا بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
NEX-LMS: A novel adaptive controls cheme for harmonic sound quality control
a b s t r a c t
This paper presents a novel adaptive control scheme,with improved convergence rate
for the equalization of harmonic disturbances such as engine noise. First, modifications
for improving convergence speed of the standard filtered-XLMS control are described.
Equalization capabilities are then implemented, allowing the independent tuning of
harmonics. Eventually, by providing the desired order vs. engine speed profiles, the
pursued sound quality attribute scan be achieved. The proposed controls cheme is first
demonstrated with a simple secondary path model and, then, experimentally validated
with the aid of a vehicle mockup which is excited with engine noise. The engine
excitation is provided by are al-time sound quality equivalent engine simulator.
Stationary and transient engine excitations are used to assess the control performance.
The results reveal that the proposed controller is capable of large order-level reductions
(up to 30dB)for stationary excitation, which allows a comfortable margin for
equalization.The same holds for slow run-ups (415 s) thanks to the improved
convergencerate. This margin,however, gets narrower with shorter run-ups (r10 s)
NEX-LMS:
طرح كنترل تطبيقي جديد براي كنترل كيفيت صداي هارموني
چكيده
در اين مقاله، يك طرح كنترل تطبيقي جديد با سرعت همگرايي بهبوديافته براي برابرسازي اغتشاشات هارموني همچون نويز موتور ارائه ميشود. نخست، تغييرات انجام شده براي بهبود سرعت همگرايي كنترلX-LMSفيلترشدهي استاندارد تشريح ميشود. سپس قابليتهاي برابرسازي براي تنظيم مستقل هارمونيها انجام ميشود. در نهايت، ميتوان با ارائهي مرتبه دلخواه به ازاي پروفيلهاي سرعت موتور، ويژگيهاي كيفيت صداي مورد نظر را بهدست آورد. ابتدا، طرح كنترل پيشنهادي براي يك مدل مسير ثانويه ساده نشان داده ميشود و سپس بصورت آزمايشگاهيو با استفاده از مدل اوليه يك خودرو كه با نويز موتور تحريك ميشود مورد آزمايش و اثبات قرار ميگيرد. تحريك موتور با يك شبيهساز موتور معادل كيفيت صداي بلادرنگ انجام ميشود. تحريكهاي ثابت و گذراي موتور براي ارزيابي عملكرد كنترلي استفاده ميشوند. نتايج بدست آمده حاكي از قابليت كنترلكننده پيشنهادي در كاهش سطوح-مرتبه بالا (تا 30 دسي بل) براي تحريك ثابت است، كه حاشيه امني براي برابرسازي ميسر ميسازد. همين حالت براي جهشهاي كند و با توجه به سرعت همگرايي بهبوديافته برقرار است. با وجود اين، اين حاشيه با جهشهاي كوتاهتر باريكتر مي شود.
.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 857 كيلو بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Synchronization of a Class of Fractional-Order Chaotic Neural Networks
Abstract: The synchronization problem is studied in this paper for a class of fractional-order
chaotic neural networks. By using the Mittag-Leffler function, M-matrix and linear feedback
control, a sufficient condition is developed ensuring the synchronization of such neural
models with the Caputo fractional derivatives. The synchronization condition is easy to
verify, implement and only relies on system structure. Furthermore, the theoretical results
are applied to a typical fractional-order chaotic Hopfield neural network, and numerical
simulation demonstrates the effectiveness and feasibility of the proposed method
سنكرون سازي كلاسي از شبكه هاي عصبي آشفته با مرتبه ي كسري
چكيده
در اين مقاله مسئله سنكرونسازي براي طبقهاي از شبكههاي عصبي آشفته با مرتبهي كسري مطالعه ميشود. با استفاده از تابع ميتاگ - لفر، كنترل فيدبك خطي و ماتريس-M، يك شرط كافيايجاد شده است كه سنكرونسازيچنين مدلهاي عصبي با مشتقات كسري كاپوتو را تضمين ميكند. اثبات و پيادهسازي شرط سنكرونسازي آسان و تنها بر ساختار سيستم متكي است. علاوه بر اين، نتايج تئوري بر يك شبكهي عصبي هوپفيلد آشفتهي نوعي از مرتبهي كسرياعمال ميشود، و شبيهسازي عددي اثربخشي و امكانسنجي روش ارائه شده را نشان ميدهد.
.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده |
| فرمت فايل | doc |
| حجم فايل | 149 كيلو بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
A quick overview on rotatory Brush and Brushless DC Motors
Abstract - This document presents a quick
overview on rotatory brush and brushless DC
motor technologies.
It starts from the basic electric motor principles to
show later the difference between both devices.
Despite of the need of a motor controller for
brushless solution, the advantages that offers this
technology makes it the most used for actual
systems in the field of motion control.
بررسي سريع موتورهاي جريان مستقيم دوار با جاروبك و بدون جاروبك
چكيده
اين مقاله به صورت گذرا به مروري بر فناوري هاي موتورهاي DC با جاروبك و بدون جاروبك مي پردازد. در اينجا از مفاهيم پايه موتور الكتريكي براي نشان دادن تفاوت بين اين دو موتور استفاده مي شود. با وجود نياز به كنترلكننده موتور براي روش بدون جاروبك، مزايايي كه اين تكنولوژي ارائه مي دهد باعث شده است كه بيشترين كاربرد را در سيستم هاي واقعي در زمينه كنترل حركتي داشته باشد.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 1.056 مگا بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Control of VSC-based STATCOM using conventional and direct-current vector control strategies
a b s t r a c t
A STATCOM is a device that can compensate reactive power and provide voltage support to an ac system.
Due to the advance of power electronic technology, VSC-based IGBT or IGCT converters have been
increasingly used in modern STATCOM systems. A traditional VSC-based STATCOM consists of a voltage
source converter, connected to an energy storage device on one side and to the ac power system on the
other, and a control system based on the conventional standard d–q vector control technology. This paper
studies and compares the conventional and a direct-current vector control schemes for a VSC-based
STATCOM. A limitation of the conventional control mechanism is analyzed. An optimal control strategy
is developed based on a direct-current vector control design. Close-loop control evaluation demonstrates
that a D-STATCOM system works well using the proposed control mechanism both within and beyond
the converter linear modulation limit while the conventional standard control technique could result
in over voltage and system oscillations when the converter operates beyond its linear modulation limit.
كنترل STATCOM مبتني بر VSC با استفاده از راهبردهاي متداول و كنترل بردار جريان مستقيم
چكيده
STATCOM دستگاهي است كه ميتواند توان راكتيو را جبرانسازي كند و پشتيباني ولتاژ را براي يك سيستم ac ارائه كند. با توجه به پيشرفت فنآوري الكترونيك قدرت، مبدلهاي IGCT يا IGBT مبتني بر VSC بطور قابل توجهي در سيستمهاي STATCOM مدرن استفاده ميشوند. STATCOM مبتني بر VSC متعارف شامل مبدل منبع ولتاژ (كه به دستگاه ذخيرهسازي انرژي در يك سو و سيستم قدرت ac در سوي ديگر متصل است) و سيستم كنترل مبتني بر فنآوري كنترل بردار d-q استاندارد معمولي است. اين مقاله طرحهاي كنترل بردار جريان مستقيم و متعارف براي STATCOM مبتني بر VSC را مطالعه و مقايسه ميكند. محدوديت ساز و كار كنترل متعارف آناليز ميشود. يك استراتژي كنترل بهينه بر اساس طرح كنترل بردار جريان مستقيم ايجاد ميشود. ارزيابي كنترل حلقه-بسته نشان ميدهد كه سيستم D-STSTCOM با استفاده از ساز و كار كنترلي ارائه شده هم در داخل و هم خارج از حد مدولاسيون خطي مبدل بخوبي كار ميكند اما زمانيكه مبدل فراتر از حد مدولاسيون خطي كار ميكند روش كنترل استاندارد متعارف باعث اضافه ولتاژ و نوسانات سيستم ميشود.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 1.718 مگا بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Coordinated Control of Flexible AC Transmission System Devices Using an Evolutionary Fuzzy Lead-Lag Controller With Advanced Continuous Ant Colony Optimization
Abstract—This paper proposes an evolutionary fuzzy lead-lag
control approach for coordinated control of flexible AC transmission
system (FACTS) devices in a multi-machine power system.
The FACTS devices used are a thyristor-controlled series capacitor
(TCSC) and a static var compensator (SVC), both of which
are equipped with a fuzzy lead-lag controller to improve power
system dynamic stability. The fuzzy lead-lag controller uses a
fuzzy controller (FC) to adaptively determine the parameters
of two lead-lag controllers at each control step according to the
deviations of generator rotor speeds. This paper proposes an Advanced
Continuous Ant Colony Optimization (ACACO) algorithm
to optimize all of the free parameters in the FC, which avoids the
time-consuming task of parameter selection by human experts.
The effectiveness and efficiency of the proposed evolutionary
fuzzy lead-lag controller for oscillation damping control is verified
through control of a multi-machine power system and comparisons
with other lead-lag controllers and various population-based
optimization algorithms
كنترل هماهنگ شده ي ادوات سيستم انتقال AC انعطاف پذير با استفاده از كنترلرپيشفاز-پسفاز فازي تكاملي با بهينه سازي كولوني مورچه پيوسته ي پيشرفته
چكيده
در اين مقاله، يك روش كنترل پيشفاز-پسفاز فازي تكاملي براي كنترل هماهنگشدهي ادوات سيستم انتقال AC انعطافپذير (FACTS) در سيستم قدرت چندماشينه ارائه ميشود. ادوات FACTS استفاده شده عبارتند از خازن سري كنترل شده با تريستور (TCSC) و جبرانساز وار استاتيك (SVC) كه هر دو داراي يك كنترلر پيشفاز-پسفاز فازي به منظور بهبود پايداري ديناميكي سيستم قدرت هستند. كنترلر پيشفاز-پسفاز فازي از كنترلر فازي (FC) به منظور تشخيص تطبيقي پارامترهاي دو كنترلر پيشفاز-پسفاز در هر مرحلهي كنترلي با توجه به انحرافهاي سرعتهاي روتور ژنراتور استفاده ميكند. اين مقاله الگوريتم بهينهسازي كولوني مورچه پيوستهي پيشرفته (ACACO) را به منظور بهينهسازي تمام پارامترهاي آزاد در FC ارائه ميكند كه از كار زمانبر انتخاب پارامتر توسط كارشناسان انساني جلوگيري ميكند. اثر بخشي و بازده كنترلر پيشفاز-پسفاز فازي براي كنترل ميرائي نوسانات از طريق كنترل سيستم قدرت چند ماشينه و مقايسهها با ديگر كنترلرهاي پيشفاز-پسفاز و الگوريتمهاي مختلف بهينهسازي مبتني بر ازدحام تاييد ميشود.
..
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 851 كيلو بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Co-Simulation Training Platform for Smart Grids
Abstract—Power systems training and education faces serious
challenges due to the rising complexity of energy systems. This
paper presents a simulation-based training platform for educating
students and power systems professionals in complex Smart Grid
applications. The system is split into parts like electrical grid or
controls and specialized, domain-specific tools are then coupled
to be able to simulate the overall behavior. Experiences with the
developed education and training material and the corresponding
modeling and simulation environment are discussed. The usage of
advanced modeling and simulation approaches, especially when
providing new functionality via coupling of simulation, is an accessible
way to train and educate students efficiently in the complex
and interdisciplinary area of power systems.
پلت فرم آموزش شبيه سازي براي شبكه هاي هوشمند
چكيده
آموزشسيستمهايقدرت بدليل پيچيدگيروز افزون سيستمهاي انرژي با چالشهاي جدي روبروست. در اين مقاله، يكپلتفرم آموزشيمبتني برشبيهسازيبراي آموزش دانشجويانو متخصصان سيستمهاي قدرت در كاربردهاي شبكه هوشمند پيچيده ارائه ميشود. اين سيستمبه بخشهاييمانندشبكه برقو ياتقسيمكنترليتقسيم ميشود وسپس ابزار تخصصيدامنه خاصمربوطهكه قادر بهشبيهسازي رفتاركلي است استفاده ميشود.تجارب مربوط به آموزش ايجاد شدهومواد آموزشيومحيط مدلسازي وشبيهسازيبحث شده است. استفادهاز روشهاي مدلسازي وشبيهسازيپيشرفته، بويژه هنگاميكهقابليتهاي جديدياز طريقجفت كردن شبيهسازي ارائه ميشود،روش قابل دسترسي براي تمرين دادنو آموزش دانشجويان بصورت موثردر زمينهميان رشتهاي سيستمهاي قدرت است.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده isi |
| فرمت فايل | doc |
| حجم فايل | 1.585 مگا بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Damping Inter-Area Oscillations Using Phase Imbalanced Series Compensation Schemes
Abstract—The recently proposed phase imbalanced series capacitive
compensation concept has been shown to be effective in enhancing
power system dynamics as it has the potential of damping
power swing as well as subsynchronous resonance oscillations. In
this paper, a comparative effectiveness of two “hybrid” series capacitive
compensation schemes in damping inter-area oscillations
is evaluated. A hybrid scheme is a series capacitive compensation
scheme, where two phases are compensated by fixed series capacitor
(C) and the third phase is compensated by either a TCSC or
SSSC in series with a fixed capacitor
| دسته بندي | مقالات ترجمه شده |
| فرمت فايل | doc |
| حجم فايل | 431 كيلو بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
DC Motor Speed Control: A Case between PID Controller and Fuzzy Logic Controller
Abstract– Proportional-Integral-Derivative (PID) controllers have gained wide popularity in the control of DC motors. Their performances, though require some degree of manual tuning by the operator, are still satisfactory but a means of auto-tuning is desirable. In this paper, the performance of a select dc motor controlled by a proportional-integral-derivative (PID) controller is investigated. An overshoot is observed with an accompanied large settling time thereby confirming the behavior of a typical PID controller. It is therefore a matter of necessity to tune the PID controller in order to obtain the desired performance. On the other hand, a fuzzy logic based controller applied to the dc motor is investigated. With the application of appropriate expert rules, there is no overshoot and the settling time is within the desired value. With fuzzy logic controller, manual tuning is eliminated and intelligent tuning takes the centre stage with satisfactory performance.
كنترل سرعت موتور DC:
موردي بين كنترلر PID و كنترلر منطق فازي
چكيده
كنترلكنندههاي مشتق-انتگرال-تناسبي (PID) بصورت گستردهاي در كنترل موتورهاي DC رايج شدهاند. اگرچه، عملكرد كنترلكنندههاي PID مستلزم برخي درجات تنظيم دستي توسط اپراتور است، هنوز داراي عملكرد رضايتبخش هستند اما استفاده از تنظيمخودكار براي آنها مطلوب است. در اين مقاله، عملكرد موتور DC انتخابي توسط كنترلكنندهي مشتق-انتگرالي-تناسبي (PID) بررسي ميشود. يك اورشوت همراه با زمان نشست بزرگ مشاهده شد كه رفتار كنترلكنندهي PID معمولي را تاييد ميكند. از اينرو، تنظيم كنترلكنندهي PID به منظور دستيابي به عملكرد مطلوب از اهميت شاياني برخوردار است. به بيان ديگر، كنترلكنندهي مبتني بر منطق فازي براي موتور DC بررسي ميشود. با استفاده از قوانين خبرهي ويژه، هيچ اورشوت و زمان نشستي در مقدار مورد نظر وجود ندارد. با استفاده از كنترلكنندهي منطق فازي، تنظيم دستي حذف ميشود و تنظيم هوشمند بخش مركزي با عملكرد رضايتبخش را ارائه ميكند.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
| دسته بندي | مقالات ترجمه شده |
| فرمت فايل | doc |
| حجم فايل | 439 كيلو بايت |
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود
Fuel Cell Voltage Control using neural network based on model predictive control
Abstract— in this paper, a neural network based model
predictive control (NNMPC) algorithm was implemented to
control the voltage of a proton exchange membrane fuel cell
(PEMFC). In this approach, a neural network model is trained to
predict the future process response over the specified horizon.
The predictions are passed to a numerical optimization routine
which attempts to minimize a specified cost function to calculate
a suitable control signal at each sample instant. The performance
results of the NNMPC were compared with a fuzzy controller
كنترل ولتاژ پيل سوختي با استفاده از شبكه ي عصبي بر اساس مدل كنترل پيشبين
چكيده
در اين مقاله، يك شبكهي عصبي مبتني بر الگوريتم كنترل پيشبين مدل (NNMPC) به منظور كنترل ولتاژ پيل سوختي غشاي تبادل پروتون (PEMFC) پياده سازي ميشود. در اين روش، يك مدل شبكهي عصبي به منظور پيشبيني پاسخ روند آتي در افق زماني مشخص آموزش داده ميشود. پيشبينيها از يك روال بهينهسازي عددي عبور ميكنند كه تلاش ميكند تا تابع هزينهي مشخص را در هر لحظه از زمان براي محاسبه سيگنال كنترل مناسب مينيمم كند. نتايج عملكرد NNMPC با يك كنترل كنندهي فازي مقايسه ميشود.
پس از پرداخت، لينك دانلود فايل براي شما نشان داده مي شود
پرداخت و دانلود